If you do not able to connect Wi-Fi properly then follow my steps for troubleshooting this problem. It supports ICS Wi-Fi 802.11 b/g/n, DLNA, Wi-Fi hotspot.
Step 1: Activate Wi-Fi
To turn Wi-Fi on and connect to a wireless network:
From the home screen press the menu key.
Tap Settings.
Tap Wireless and networks.
Touch the Wi-Fi check box to turn Wi-Fi on.The phone will scan for available wireless networks.
Tap Wi-Fi settings.The network names and security settings (Open network or Secured with WEP) of detected Wi-Fi networks are displayed in the Wi-Finetworks section.
Tap a Wi-Fi network to connect. When you select an open network, you will be automatically connected to the network. When you select a network that is secured with WEP, enter the WEP (security) key and then touch Connect.
Step 1: Activate Wi-Fi
To turn Wi-Fi on and connect to a wireless network:
From the home screen press the menu key.
Tap Settings.
Tap Wireless and networks.
Touch the Wi-Fi check box to turn Wi-Fi on.The phone will scan for available wireless networks.
Tap Wi-Fi settings.The network names and security settings (Open network or Secured with WEP) of detected Wi-Fi networks are displayed in the Wi-Finetworks section.
Tap a Wi-Fi network to connect. When you select an open network, you will be automatically connected to the network. When you select a network that is secured with WEP, enter the WEP (security) key and then touch Connect.
Step 2: Unable to establish connection with the phone
The wireless network may not be in range or has too of a weak signal to provide a successful connection. Check the signal bar to ensure you have strong connection.
Re-enter the key on the phone to match the key configured on the router. Make sure that the encryption type and security settings match on the router and phone.
If WEP encryption is in use, check that the key configured on the router matches the key entered on the phone.
The wireless network you're attempting to connect to may be configured for staticIP addresses only. Check with the system administrator for an IP address assignment.
Unplug the power from your router, turn the phone off. Plug back in your router first, then wait for 1 minute and then turn on your phone.
Step 3: Ruckus WiFi router issue
Issue: Device does not connect to Ruckus WiFi router (example model#: 2825)
Description: In DHD11 TA3 we have an IP address conflict between the LTE IP address and the default gateway address with the Ruckus router.
Work around: Change the default gateway address on the router as follows:
Login Router through Browser: http://192.168.20.1
User name: user
Password: password
(user name and pass written on AP)
goto "Local network" under Configuration section on the Left side.
change the field in : "Local IPAddress" from 192.168.20.1 to
192.168.0.1
Change :"Starting Address" from 192.168.20.2 to 192.168.0.2
click update settings.
Note: We become aware of an issue with a certain Wi-Fi router Router: Netgear N600 WNDR3400, that may experience loss of Internet Connectivity on Wi-Fi signal with theDROID RAZR MAXX.
Step 4: Here's our solution for this issue
Go to the wireless settings for the Netgear router from a browser on your PC by going to 192.168.1.1
On the Router Manager screen, go to the Setup section in the left hand column and select Wireless Settings
Under the Wireless Network (2.4GHzb/g/n) section change the channel from Auto to a static channel of your choosing. (Any number from 01 -11)
Scroll down to the bottom of the Wireless Settings screen and select Apply.
Step 4: Here's our solution for this issue
Go to the wireless settings for the Netgear router from a browser on your PC by going to 192.168.1.1
On the Router Manager screen, go to the Setup section in the left hand column and select Wireless Settings
Under the Wireless Network (2.4GHzb/g/n) section change the channel from Auto to a static channel of your choosing. (Any number from 01 -11)
Scroll down to the bottom of the Wireless Settings screen and select Apply.
0 comments:
Post a Comment